HP Integrity NonStop J-Series - Manual (Page 222)

Logical
The type of device supported by this SAC.
Values: Disk, Tape, SCSI Controller, Not Configured, Unknown Configured Type
Actions
Responsive Test
Verifies that the component is connected and responding.
Storage Router
This object represents one of these resources:
SCSI Extender A pair of SCSI extenders (one SCSI-to-Fiber extender and one Fiber-to-SCSI
extender) can be used to increase the distance between the host system and any of these devices
to a maximum of 10 kilometers:
• 9840 cartridge tape drive
• T525x Super DLT tape drive
• 5242 DAT72 tape drive (all models)
• Virtual tape subsystems (all models)
• N152x LTO tape drives (all models)
SCSI-to-Fiber Converter A Fibre Channel (scsi to fiber) converter is used to connect the following
tape drives:
• CT9840FC
• CT9841FC
to the host system through a SCSI SAC on one of these supported CRUs:
• IOMF2
• ServerNet/DA
Location in OSM Tree: System > Tape Collection > Tape Drive > Storage Router
Example: Storage Router $EXT8
Attributes
Storage Router
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
Logical
The type of router.
Values: SCSI Extender or SCSI-to-Fiber Converter Router Type
The number assigned to the router by the file system. Logical Device Number
Whether the resource is communicating to the host system.
Values: Communicating, Not Communicating, Unknown Communication State
A unique number that identifies the product as a SCSI Extender (2 models)
or SCSI to Fiber Converter. Otherwise, Unknown is shown. Product ID
222 System Resources