Physical, Actions, Replace – HP Integrity NonStop J-Series User Manual
Page 191: Power supply (clim), Attributes, Power supply, Logical, Power supply (fcdm), Power supply logical
Physical
The state of the Blade Element Power Supply, as known to the operating
system on the server. Possible values include OK, Fault, Power Loss, and
Power Supply Fan Fault.
Device State
Identifies the manufacturer of the component.
Displayed for NonStop NS14000 series and NS16000 series servers only.
Manufacturer
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
NOTE:
Not displayed for NS2100, NS2200 series, NS2300, or NS2400
series servers.
Part Number
The serial number of the component assigned to it by the supplier of the
component.
Displayed for NonStop NS14000 series and NS16000 series servers only.
Serial Number
Actions
Replace
Displays a procedure for replacing the Blade Element power supply.
Power Supply (CLIM)
A subcomponent of the
.
Location in OSM Tree: System > CLIMs > CLIM > Power Supply
Attributes
Power Supply
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Service State
Logical
The state of the component as known to the operating system on the server.
Possible values include: OK, Degraded, Fault, Not Installed.
Device State
Actions
Replace
Launches a documented service procedure to replace a power supply unit in a CLIM.
Power Supply (FCDM)
Subcomponent of a
. There are two power supplies in each FCDM.
Location in OSM Tree: System > Group > FCDM Collection > FCDM > Power Supply
Example: Power Supply (111.211.1.95)
Power Supply (CLIM)
191