HP Integrity NonStop J-Series - Manual (Page 220)

Physical
The model number of the Smart Array Controller that was assigned in
manufacturing. Model
The serial number of the Smart Array Controller. Serial Number
Firmware
Indication of the differences, if any, between the current and default Smart
Array Controller firmware versions.
Values
Compare State
The name of the file to be used for a Smart Array Controller firmware update. Default File Name
The version of the firmware to be used for a Smart Array Controller firmware
update. Default File Version
The version of the Smart Array Controller firmware running on the CLIM. Version
Actions
Firmware Update
Updates the firmware running on the Smart Array Controller. Upon completion, OSM offers to
reboot the CLIM, in order for the CLIM to start using the updated firmware.
SNDA (ServerNet/DA)
The ServerNet/DA CRU (customer-replaceable unit) is an adapter that allows external storage
devices to be connected to servers. The external storage devices are physically connected to either
Fiber SACs (
FSAC ) or SCSI SACs ( SSAC ) mounted on the ServerNet/DA CRU.
Location in OSM Tree: System > Group > Module > SNDA
Slot Location: ServerNet/DA CRUs can be located in 51, 52, 53, and 54 in I/O enclosures (service
side).
Example: SNDA (12.1.54)
Attributes
SNDA
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
Physical
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components. Hardware Revision
Identifies the manufacturer of the component. Manufacturer
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts. Part Number
Whether the component is powered on. Values Power State
A unique serial number that identifies the component. Track IDs are used for
tracking components. Track ID
220 System Resources