HP Integrity NonStop J-Series - Manual (Page 204)

Rediscover
Causes OSM to refresh and reanalyze the processor switch and all subcomponents. Refresh refers
to OSM updating the attribute values displayed in the OSM Service Connection interface. Reanalyze
refers to the running of OSM incident analysis, which checks EMS event messages and creates
alarms in OSM if certain conditions exist.
Replace
Launches an OSM guided procedure with step-by-step instructions for replacing the processor
switch chassis or subcomponents.
Retrieve Network Connectivity Info
Displays remote IP addresses stored in the IPAUTH file of the processor switch.
Set Physical Location
Allows you to assign these Physical Location attributes for the processor switch module:
• Rack Name is a user-defined name for the rack containing the processor switch. You can enter
up to 15 alphanumeric characters.
• Rack Offset is a numerical value representing the location of the processor switch module
within the rack. A valid integer (from 1 to 42) must be specified when performing the Set
Physical Location action, or the action will fail.
• Locator is an optional text string to help identify the physical location of the processor switch
module. It must contain alphanumeric characters only.
• This parameter, used for DC-powered Telco systems only, allows you to specify a system alarm
panel (SAP) identifier, which is then displayed in OSM by the Alarm Panel Identifier attribute
for this hardware resource. An system alarm panel (SAP) provides visual alarm indicators and
relays for generating three levels of alarms to alert the customer to the severity of a hardware
error in the system. By default, systems are configured with one SAP located in the CIA for
the group 11 I/O enclosure. You might need to set the Alarm Panel Identifier if the system
has multiple SAPs, you add equipment to a system, or you move equipment from one system
to another.
With T0682 H02 AAN and later, you can also use the Physical Configuration Tool to set the Rack
Name and Rack Offset values in a consistent manner throughout the system, while creating a
physical view of your modular racks.
Synchronize FIR Files to Other Switches
Synchronizes the FRU information Record (FIR) files of the X and Y fabric processor switches.
Write LCD Line
Allows you to edit the text displayed by the processor switch’s LCD. You can modify lines 9 through
15 with this action.
SAC (ServerNet Addressable Controller)
A LAN controller that is a component of one of these CRUs:
PIFs in SAC SACs in CRU CRU
4 4 CCSA
2 2 E4SA
1 1 FESA
204 System Resources