HP Integrity NonStop J-Series - Manual (Page 106)

Physical
The model number of the CLIM that was assigned in manufacturing. Model
The part number of the CLIM that was assigned in manufacturing. Part Number
The serial number of the CLIM. Serial Number
Physical Location
The values displayed by these attributes are assigned through the Physical Configuration Tool .
A user-defined name assigned to identify the rack in which the CLIM is
located. Rack Name
A number (from 1 to 42) assigned to describe the location of the CLIM within
the rack. Rack Offset
X1 Fabric Information
The location of the ServerNet X1 fabric port where the CLIM is configured.
Example: Group 100, Module 2, Slot 5, Port 3, Fiber 1 (Fiber applies to
NonStop BladeSystems only) Configured Location
X2 Fabric Information
The location of the ServerNet X2 fabric port where the CLIM is configured,
provided the CLIM is configured for two connections per ServerNet fabric.
Example: Group 100, Module 2, Slot 7, Port 3, Fiber 2 (Fiber applies to
NonStop BladeSystems only) Configured Location
Y1 Fabric Information
The location of the ServerNet Y1 fabric port where the CLIM is configured.
Example: Group 100, Module 3, Slot 5, Port 3, Fiber 1 (Fiber applies to
NonStop BladeSystems only) Configured Location
Y2 Fabric Information
The location of the ServerNet Y2 fabric port where the CLIM is configured,
provided the CLIM is configured for two connections per ServerNet fabric.
Example: Group 100, Module 3, Slot 7, Port 3, Fiber 2 (Fiber applies to
NonStop BladeSystems only) Configured Location
iLO
Version -- the version of the firmware running on the iLO.
Indication of the differences, if any, between the current and default iLO
firmware versions.
Values
Compare State
The name of the file to be used for an iLO firmware update. Default File Name
The version of the firmware to be used for an iLO firmware update. Default File Version
The version of the firmware running on the iLO. Version
106 System Resources