HP Integrity NonStop J-Series - Manual (Page 134)

Stop Disk
Terminates all paths for this disk drive. When the Stop action finishes, the paths are in a Down
state. If the disk drive is currently in use, a dialog box warns you and asks whether or not you
want to continue with the action.
Stop Primary Path
Terminates the primary path to the disk. When the Stop action finishes, the path is in a Down state.
If the disk drive is currently in use, a dialog box warns you and asks whether or not you want to
continue with the action.
Stop Volume
Terminates all paths for the primary and mirror drives of this volume. When the Stop action finishes,
the paths are in a Down state.
Switch Process Pair
Switches the primary and backup disk I/O processes.
Switch to Backup Path
Switches processing from the primary to the backup path.
Switch to Primary Path
Switches processing from the backup to the primary path.
ESS Disk Collection
Contains all ESS Disks that are connected to the system.
Location in OSM Tree: Under System
Example: ESS Disk Collection
Attributes
None.
External Disk
An external disk drive that connects to a system through the ServerNet/DA CRU. The External Disk
CRU is housed in an 8-slot disk enclosure that is physically connected to a Fiber SAC (ServerNet
addressable controller) mounted on the ServerNet/DA CRU.
External disks are visible in the tree pane and in the Inventory view of the Management window.
In the tree pane, expand the External Disk Collection to see the individual external disk drives. In
the Inventory view, each external disk drive is listed on a separate line. External disk drives are
not visible in the Physical view.
Location in OSM Tree: System > External Disk Collection > External Disk
Slot Location: External to enclosures
Example: External Disk $MARS2-P
Attributes
External Disk
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
134 System Resources