HP Integrity NonStop J-Series User Manual
Page 35
•
action has been added to the CLIM object (was previously on just the CLIMs
object).
•
A new Prepare for Down System CLIM Firmware Update action on the
object, to be
used in conjunction with the Down System CLIM Firmware Update Tool, a new component of
OSM Console Tools T0634 G06 ABB and later.
OSM Console Tools T0634 G06 ABB and later also includes the NonStop Maintenance LAN
DHCP DNS Configuration Wizard, which replaces the CLIM Boot Service Configuration Wizard.
It can be used to configure the DHCP and DNS servers required for NonStop J-series systems and
any NonStop systems with CLIMs attached.
For information on installing OSM Console Tools components, see the NonStop System Console
Installer Guide. For information on using the NonStop Maintenance LAN DHCP DNS Configuration
Wizard or the Down System CLIM Firmware Update Tool, see the online help available from within
those tools.
At H06.23/J06.12, OSM Service Connection (T0682 H02 ACN) added:
•
Support for HP Integrity NonStop NS2200 series servers, including the new
value of NSE-AD, as displayed in that attribute of the
object.
•
Support for Solid State Drives (SSDs) in D2700 Enclosures, including:
—
A
action has been added to the
object.
—
A Media Type attribute has been added to the
object to indicate whether the
disk is Magnetic or Solid State.
•
Support for disk partitioning on both Hard Disk Drives (HDDs) and Solid State Disks (SDDs),
including:
—
The Start Disk, Start Volume, Stop Disk, and Get Logical Disk(s) actions on the
object have been modified to work with partitioned disks.
—
A Partition Number attribute has been added to the
object to indicate
the partition number.
•
For G6
, a new subcomponent
object.
•
Support for collecting CLIM logs onto a NonStop system, through two new actions on the
object:
and
Set Location for CLIM Log Collection
.
•
Support for enhanced
options.
At H06.22/J06.11, OSM Service Connection (T0682 H02 ACJ) added:
•
Support for Integrity NonStop NB54000 BladeSystems.
•
The ability to control access to certain OSM Service Connection actions through the
feature.
•
The option of having Up-rev firmware on CLIM and SAS Disk Enclosure components flagged
as a problem attribute that is propagated up to parent objects in the OSM Service Connection.
For information on how configure this option in your OSMCONF file, see the OSM
Configuration Guide.
•
The option of configuring OSM to monitor system devices (storage routers, UPSs, maintenance
switches, Onboard Administrators, or CLIMs) located outside of the dedicated service LAN.
For information on how configure this feature in your OSMCONF file, see the OSM
Configuration Guide.
•
A Start Volume action has been added to the
object.
•
A Set LED State action has been added to the
object.
35