Logical, Actions, Clear activity in progress – HP Integrity NonStop J-Series User Manual

Page 93: Firmware update, Perform cable check, Set activity in progress, Set processor expected redundancy, Blade element, Blade elements

Logical

Displayed only if there is an activity in progress, to report the current activity,
such as Firmware Update in Progress or Service Procedure in Progress.

NOTE:

Displayed for NonStop NS14000 series and NS16000 series

servers only.

Activity

The time the current acivity began.

NOTE:

Displayed for NonStop NS14000 series and NS16000 series

servers only.

Activity Start Time

If yes, displays the Activity and Activity Start Time attributes.

NOTE:

Displayed for NonStop NS14000 series and NS16000 series

servers only.

Activity in Progress

The expected redundancy for all the processors in the complex. Set using
the

Set Processor Expected Redundancy

action.

Values: Simplex, Duplex, Triplex

NOTE:

Displayed for NonStop NS14000 series and NS16000 series

servers only.

Expected Processor Redundancy

The Group Number for the Blade Complex.

Group Number

Actions

These actions apply to NonStop NS14000 series and NS16000 series servers only. There are no
actions under the Blade Complex object for any other NonStop servers.

Clear Activity in Progress

Clears the current service activity.

Firmware Update

Launches a guided procedure to update the firmware in the Blade Elements within the Blade
Complex for Integrity NonStop NS14000 series and NS16000 series servers. Blade firmware for
other types of NonStop NS-series servers is done through a Firmware Update action the

Blade

Element

object.

Perform Cable Check

Initiates a complex-wide cable check.

Set Activity in Progress

Sets the current service activity.

Set Processor Expected Redundancy

Sets the expected redundancy for all the processors in the complex. Options are Simplex, Duplex,
or Triplex.

Blade Element

Formerly known in OSM as a Slice, this physical entity in the

Blade Complex