HP Integrity NonStop J-Series - Manual (Page 81)

9 Viewing Summary Reports
You can view a:
• Problem Summary
• Summary of Actions
• Summary of Alarms
• Resource Summary
Viewing a Problem Summary
The Problem Summary lists all resources that are in a problem state. The report lists this information:
• The name of the problem resource
• The Service State (See possible values .)
• The attribute group in which the problem occurs
• The attributes in which the problem occurs
To create the report:
Select Summary > Problem.
Viewing a Summary of Actions
The Action Status Summary displays a summary of all actions in progress and actions that have
taken place in past 24 hours. Information for each action includes resource name, action name,
action status, and progress of the action. You can also view detailed information about each action.
Actions Not Displayed
The Rediscover action is not reported in the Action Summary dialog box. (This action updates the
OSM client interface and is not really an action performed on the system resources themselves.)
OSM Software-Triggered Actions
The Action Summary dialog box also displays actions initiated automatically by OSM software.
An Internal Refresh action on a processor is triggered and reported as a result of these activities:
• A Rediscover action on a module
• Firmware Update actions
• SP state changes
Viewing Action Details
1. In the Action Status list, select the action for which to view details.
2. Click Detail. The Action Details dialog box appears and provides detailed information about
the action.
To reach this dialog box:
Select Summary > Action.
Viewing a Summary of Alarms
The Alarm Summary displays a list of alarms in the server or ServerNet cluster. The dialog box
allows you select individual alarms for the resource and display detailed information and repair
actions that you can perform to correct them. You can use the Alarms dialog box to view the alarms
for a single resource, as described in
Viewing the Alarms Dialog Box .
Viewing a Problem Summary 81