Physical location, Actions, Link to web interface – HP Integrity NonStop J-Series User Manual
Page 245: Rediscover, Stop monitoring, Vio fcsa, Attributes, Fcsa, Link to web interface rediscover stop monitoring, Link to web

Physical Location
The values displayed by these attributes are assigned through the
A user-defined name assigned to identify the rack in which the UPS is located.
Rack Name
A number (from 1 to 42) assigned to describe the location of the UPS within
the rack.
Rack Offset
Actions
Link to Web Interface
Launches a browser-based configuration interface for the UPS, which provides additional information
and configuration options for the UPS.
Rediscover
Causes OSM to refresh and reanalyze the object. Refresh refers to OSM updating the attribute
values displayed in the OSM Service Connection interface. Reanalyze refers to the running of
OSM incident analysis, which checks EMS event messages and creates alarms in OSM if certain
conditions exist.
Stop Monitoring
Stops OSM from monitoring the UPS.
VIO FCSA
In a system containing VIO enclosures (represented in the OSM Service Connection as
),
OSM displays an FCSA object to represent:
•
In slot 1, the four built-in Fibre Channel ports that provide the functional equivalent of a Fibre
Channel ServerNet adapter.
•
In slot 7, an optional expansion VIO FCSA.
NOTE:
VIO FCSA is not a subcomponent of VIO modules in S-series or BladeSystem NB54000c
and NB56000c.
OSM does not display VIO FCSA attribute information until an associated disk process is configured
and started. For more information, see the Versatile I/O (VIO) Manual.
Location in OSM Tree: System > Fabric Group 100 > Internal ServerNet Fabric > VIO Module >
FCSA (In the Multi-Resource Actions dialog box, these FCSA objects are displayed as VIO FCSAs)
Example: FCSA (100.3.1)
Attributes
FCSA
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Service State
VIO FCSA 245