HP Integrity NonStop J-Series - Manual (Page 94)

When a Blade Complex has multiple Blade Elements, they are identified in the OSM tree pane as
400.1, 400.2, and 400.3. In the Attributes tab, the Serial Number attribute translates those values
to A, B, and C.
What OSM displays under the Blade Element object depends on the type of your HP Integrity
NonStop server.
For NonStop NS14000 series and NS16000 series servers, OSM displays:
• Two Blade Element Power Supply objects.
• A Blade Element Firmware object.
For NonStop NS1000, NS1200, NS2000 series, NS5000, or NS3000AC servers (except where
noted), OSM displays:
• A Blade System Board object (not applicable for NS5000 servers).
• A DVD-ROM object.
• A ServerNet Interface Card object.
• Two Blade Element Power Supply objects.
• Fan Assembly objects to represent each fan in the Blade as follows: slots 16 through 19 for
NS1000, slots 16 through 20 for NS5000, and slots 33 through 44 for NS3000AC, NS1200,
and NS2000 series.
• Memory Card objects.
For NonStop NS2100, NS2200 series, NS2300, and NS2400 series servers, OSM displays:
• Two Blade Element Power Supply objects.
• Six Fan Assembly objects to represent each fan in the Blade slots 32 through 37.
• Memory Card objects.
Attributes
Blade Element
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
94 System Resources