Stop primary path, Stop volume, Switch process pair – HP Integrity NonStop J-Series User Manual
Page 125: Switch to backup path, Switch to primary path, Verify physical connectivity, Disk (sas), Attributes, Physical, Firmware

Stop Primary Path
Terminates the primary path to the disk. When the Stop action finishes, the path is in a Down state.
If the disk drive is currently in use, a dialog box warns you and asks whether or not you want to
continue with the action.
Stop Volume
Terminates all paths for the primary and mirror drives of this volume. When the Stop action finishes,
the paths are in a Down state.
Switch Process Pair
Switches the primary and backup disk I/O processes.
Switch to Backup Path
Switches processing from the primary to the backup path.
Switch to Primary Path
Switches processing from the backup to the primary path.
Verify Physical Connectivity
Verifies connectivity to the disk on a particular path.
Disk (SAS)
A physical representation of each SAS disk in a
. A logical representation of
each CLIM-attached SAS disk is displayed under the
object.
System > SAS Disk Enclosures > SAS Disk Enclosure > Disk
Attributes
Physical
The state of the component as known to the operating system on the server.
Device State
Identifies the media type of the SAS disk drive as either “Magnetic” or “Solid State.”
Media Type
The model number of the SAS disk drive that was assigned in manufacturing.
Model
The serial number of the SAS disk drive.
Serial Number
Firmware
The version of the firmware running on the SAS disk drive.
Version
Actions
Firmware Update
Updates the firmware running on the SAS disk drive.
Get Logical Disk(s)
Retrieves the names of the logical disks configured for the physical disk in the SAS disk enclosure.
Replace
Launches a documented service procedure to replace a disk drive in a SAS disk enclosure.
Disk (SAS)
125