HP Integrity NonStop J-Series - Manual (Page 207)

Attributes
Physical
The product name of the SAS card. Model
The serial number of the SAS card. Serial Number
Logical
A list of the SAS Disk Enclosure(s) to which the SAS card is attached. Connected Enclosures
BIOS
Indication of the differences, if any, between the current and default BIOS
versions.
Values
Compare State
The name of the file to be used for a BIOS update. Default File Name
The version of the firmware to be used for a BIOS update. Default File Version
The version of the BIOS running on the SAS card. Version
Firmware
Indication of the differences, if any, between the current and default firmware
versions.
Values
Compare State
The name of the file to be used for a firmware update. Default File Name
The version of the firmware to be used for a firmware update. Default File Version
The version of the firmware running on the SAS card. Version
Actions
BIOS Update
Updates the BIOS running on the SAS card.
Firmware Update
Updates the firmware running on the SAS card.
Replace
Launches a documented service procedure to replace a SAS card in a CLIM.
SAS Disk Enclosure
This object, displayed under the SAS Disk Enclosures container object in OSM, represents each
SAS disk enclosure connected to a NonStop BladeSystem or supported NonStop NS-series system.
A logical representation of each CLIM-attached SAS disk is displayed under the
CLIM-Attached
Disks object.
Each SAS Disk Enclosure object contains these subcomponents:
• SAS Disks -- a physical representation of each disk drive in the SAS disk enclosure.
• Two SAS Fans *
• Two SAS Power Supply * units.
• Two IO Modules
SAS Disk Enclosure 207