Attributes, Blower, Physical – HP Integrity NonStop J-Series User Manual
Page 102: Logical, Actions, Blink led off, Blink led on, Replace, Ccsa (common communication servernet adapter), Ccsa

Attributes
Blower
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
Physical
Indicates whether or not the blower’s (amber) fault LED is blinking.
Value: Blinking or Off
LED State
The vendor hardware type.
Type
Logical
The state of the component as known to the operating system on the server.
Device State
Actions
Blink LED Off
Turns off the blinking of the blower’s (amber) fault LED.
SCF Equivalent: SCF Control SAC $ZZSTO.#sac-name, deviceid(shelf,bay), LED OFF
Blink LED On
Causes the blower’s (amber) fault LED to start blinking.
SCF Equivalent: SCF Control SAC $ZZSTO.#sac-name, deviceid(shelf,bay), LED ON
Replace
Displays the procedure for replacing the blower.
CCSA (Common Communication ServerNet Adapter)
An adapter that allows PCI-based communications devices to connect to a server. A CCSA CRU
can hold up to four CCSA ServerNet addressable controllers (
s) with four ports each, providing
up to 16 links per adapter.
This Nonstop S-series component can be connected to a Nonstop NS-series system through an
IOMF2 enclosure.
Location in OSM Tree: System > Group > Module > CCSA
Example: CCSA $ZZLAN.CCSA1 (2.1.53)
Attributes
CCSA
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
102 System Resources