HP Integrity NonStop J-Series - Manual (Page 209)

Firmware
Indication of the differences, if any, between the current and default firmware
versions.
Values
Compare State
The name of the file to be used for a firmware update. Default File Name
The version of the firmware to be used for a firmware update. Default File Version
The version of the firmware running on the SAS disk enclosure. Version
Actions
Firmware Update
Updates the firmware on the SAS Disk Enclosure.
Upon successful completion, OSM now gives you the option of turning on the enclosure's LED, to
help you identify the enclosure for the purpose of power cycling it to complete the firmware update
process
Replace
Launches a documented service procedure to replace the SAS disk enclosure in a NonStop
BladeSystem or supported NonStop NS-series system.
Set LED State
Turns the LED on the SAS disk enclosure on or off.
SAS Disk Enclosures
This object contains each SAS Disk Enclosure connected to a NonStop BladeSystem or supported
NonStop NS-series system.
Attributes
None.
Actions
None.
SCSI Controller
A controller that manages devices using the Small Computer System Interface (SCSI) protocol. This
SCSI controller is a component of I/O Multifunction (
IOMF2 ) CRUs.
Location in OSM Tree: System > Group > Module > IOMF2 > SCSI Controller
Slot Location: SCSI controllers are located on IOMF2 CRUs in slots 50 and 55 of I/O enclosures.
Example: SCSI Controller (1.1.55.1)
Attributes
SCSI Controller
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
SAS Disk Enclosures 209