HP Integrity NonStop J-Series - Manual (Page 156)

Actions
Abort
Terminates operation of the G4SA and the associated Ethernet ServerNet addressable controller
(SAC). When the Abort action finishes, the G4SA and the SAC are in the Stopped state.
Add
This action is displayed in OSM only when a G4SA is first inserted and not yet configured.
Performing this action ensures that the
Configured Type is set to G4SA.
Delete
Deconfigures the G4SA, removing the associated G4SA SAC and PIF objects. This action can only
be performed after you delete the
LIF associated with each G4SA PIF.
Power Off
Physically powers off the G4SA.
Reset
Places the G4SA in a state from which it can be started.
Start
Starts the G4SA and the associated G4SA SAC. The G4SA and the SAC must be in the Stopped
state before you perform this action.
Stop
Rather than automatically stopping the G4SA (as the Abort action does), this action first warns
you if the G4SA is currently in use (and stops it only after you confirm).
G4SA PIF
Physical interface (PIF) objects represent each of the four ports on a G4SA through which LAN
connections are made.
Each G4SA PIF has an associated LIF object.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > G4SA > G4SA SAC > G4SA
PIF
or, in a VIO enclosure:
System > Fabric Group 100 > Internal ServerNet Fabric > VIO Module > G4SA > G4SA SAC >
G4SA PIF
Example: G4SA PIF $ZZLAN.G4SA1.0.A
Attributes
G4SA PIF
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
156 System Resources