Fan (vio), Attributes, Physical – HP Integrity NonStop J-Series User Manual
Page 142: Logical, Actions, Replace, Set led state, Fc card (clim), Physical logical, Replace set led state
Fan (VIO)
A component of VIO enclosures (represented in the OSM Service Connection as
that circulates air into the enclosure to help maintain optimal temperature. There are two fans in
each VIO enclosure.
Attributes
Physical
Indicates whether or not the fan’s amber LED is lit. This state is determined
by the
action.
Value: On or Off
LED State
Identifies the manufacturer of the component.
Displayed for VIO fans in S-series VIO modules only.
Manufacturer
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Part Number
Logical
The state of the component as known to the operating system on the server.
Device State
Actions
Replace
Displays a service procedure describing how to replace a fan in a VIO enclosure.
Set LED State
Turns on or off the amber LED located on the fan. The current state is indicated by the
attribute.
FC Card (CLIM)
A subcomponent of the
.
Location in OSM Tree: System > CLIMs > CLIM > FC Card
Attributes
Physical
The product name of the FC card.
Model
The serial number of the FC card.
Serial Number
Logical
The state of the FC Card as known to the operating system on the server.
Possible values include: OK, Degraded, Fault, Power Off.
Device State
The World Wide Name (WWN) assigned to the node.
Node WWN
The World Wide Name (WWN) assigned to the port.
Port WWN
142
System Resources