HP Integrity NonStop J-Series - Manual (Page 170)

Storage ASIC Initialization Test
Prompts the storage subsystem manager process ($ZZSTO) to initialize the storage ASIC in the
CRU. If initialization fails, an alarm is generated.
This action is triggered automatically when a new CRU is inserted while OSM is running or when
an (SCF) STATUS ADAPTER command is issued. If a CRU is inserted while OSM is not running,
perform this action after logging on to the OSM Service Connection.
Test Verify
Performs basic tests on the CRU. You can perform this action when the CRU is online.
LIF
The logical interface, associated with a physical interface (PIF), used by an Ethernet controller port
or a ServerNet adapter port.
Location in OSM Tree:
For a ServerNet adapter port LIF: System > Group > Module > adapter > SAC > PIF > LIF
Example: LIF $ZZLAN.LAN01A
Attributes
LIF
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
Logical
The state of the logical interface.
Values: Started, Stopped, Unavailable LIF State
Actions
Abort
Terminates operation of the LIF. When the Abort action finishes, the LIF is in the Stopped state.
Delete
Deletes the LIF.
Start
Starts the LIF.
Stop
Rather than automatically stopping the LIF (as the Abort action does), this action first warns you if
the LIF is currently in use (and stops it only after you confirm).
170 System Resources