Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 65)

Configuring the SLC 500 CPU and I/O Modules
3-9
Processor Status Configuration
There are several processor status items that you can set to control the operation of the
SLC 500 processor.
•
Fault Override at Powerup (also available on MicroLogix)
•
Load Memory Module on Memory Error
•
Load Memory Module Always
•
Load Memory Module and Run
•
Watchdog (also available on MicroLogix)
•
I/O Slot Enables
For a full description of the processor status file, see Appendix A - Programming
Reference for Packaged Controllers or Appendix B - Programming Reference for
Modular Processors in the Instruction Set Reference manual.
To view a display showing current settings of the Processor Status bits:
1. Go to the top menu of the editor.
2. Press [F8] Display.
3. Press [F2] Prcstat .
Command Portal keys
for this function:
.DP