Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 249

Creating and Printing Reports
11-13
Ladder parms 1
These parameters determine the print modes for the ladder diagram and documentation
text.
Set the ladder parameters by pressing the function key corresponding to the parameter
you want to set. The value of that parameter toggles, a selection list appears, or a field
opens for you to type a value for the parameter.
[F1]
Rung Print List
Select
ALL
or enter the specific rung numbers or ranges to print, using the
following formats:
2-5 7
Print all rungs in ladder files 2 through 5 and file 7.
2:1 2:5 3:8
Print rungs 1 & 5 from ladder file two and rung 8 in file three.
Use a colon to indicate that rung numbers follow.
2:15-30, 3:0-20 Print rungs 15 through 30 in ladder file 2, and rungs 0 through
20 in ladder file 3. The hyphen specifies a range of rungs to
print.
2:0-20, 3:9-
Print rungs 0 through 20 in ladder file 2, and rungs 9 through
the end of ladder file 3. Use the hyphen alone after a rung
number to print from the specified rung number through the end
of that ladder file.