Search for a rung number – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 226

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
10-8
Search for a Rung Number
You can go directly to a specific rung number in any ladder file in the SLC 500.
Rung numbers entered as integers reference the current ladder file. Precede the rung
number with a ladder file reference (file number followed by a colon—see sidebar) to
go to a rung in a different program file.
1.
Select
[F1]
Search
. The function keys at the bottom of the screen change to show
the search functions.
2.
Select
[F9]
Rung
. The system prompts you for a rung number.
3.
Type the rung number you want to search for. To search for a rung in a different
program file, type the file number, then a colon, and then the rung number. For
instance, if you want to search for rung 54 in program file 3, type
3:54
. (You can
also use a semicolon or a space to separate the file number and the rung number.
For example, instead of
3:54
, you could type
3;54
or
3 54
.)
4.
Press
[Enter]
to begin the search. The system displays the rung you requested.
Command Portal keys
for this function:
.SR
You can also include
the ladder file number
and the rung number
in the Command
Portal. For example,
to go to rung 25 in
program file 2, type
.SR2:25