Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 284)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
11-48
Print Wire Labels
You can print wire labels for:
•
All defined I/O points
•
Only those I/O addresses used in the program
•
Custom labels (text strings)
You may use the default wire label formats, or create custom label formats. The default
labels are for various W.H. Brady label types.
Note You may want to print your labels on plain paper to check the spacing before printing
on your actual wire labels.
Select Wire Label Type
To select a wire label type:
1. From the Main Menu, press [F4] Reporting Options . The Reporting Options
menu appears.
2. Select [F7] Print Wire Labels . The Wire Labels Options menu appears.
3. Select [F1] Select Wire Label Type . A menu appears from which you can select
one of the existing label types or define a custom label format.
Follow the directions below to select an existing type, create your own, or modify
or delete an existing type.