Serial port to a-b 1747-pic interface converter – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 346

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
15-10
DH+ Direct Device
Fixed,
SLC 5/01
SLC 5/02
SLC 5/03
SLC 5/04
Page
Serial to 1770-KF2B
•
15-26
1784–KT/KT2
•
15-11
1784–KL
•
15-12
1784–PCMK
•
15-14
1784–KTX/KTXD
•
15-15
S-S Technologies, Inc 5136-SD/SD2
•
15-22
WinLinx driver
•
15-18
RSI LAN Logistics
•
15-24
RSI LAN Logistics NETBIOS
•
15-25
Ethernet Device
Fixed,
SLC 5/01
SLC 5/02
SLC 5/03
SLC 5/04
Page
A-B Ethernet to DH+
•
15-27
WinLinx Driver Ethernet to DH+
•
15-28
Serial Port to A-B 1747-PIC Interface Converter
The 1747–PIC Interface Converter supports DH-485 communication only. Note that
the SLC 5/04 processor only supports DH–485 communication via channel 0 (RS–232).
See Allen-Bradley’s
SLC 500 Modular Hardware Style Installation and Operation
Manual
, Publication 1747–6.2 for connection information.
The table below describes the parameters that become available when you select this
device on a DH-485 network.
Parameter
Description
[F1]
Computer/
Terminal Address
enter the station address (0-31 decimal). This address must be
unique on the network.
[F4]
Communications
Port
designates which communication port on your computer to use.
If using COM 3 or 4, you must enter the port address and IRQ.
Refer to page
15-32
for information on setting the COM Port.
[F5]
Baud rate
select the baud rate of the DH-485 network