I/o parts list report – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 273

Creating and Printing Reports
11-37
Note
The full list modes print as many lines of description text as will fit. (More lines can be
printed if you have an 8 point I/O module than if you have a 16 point or 32 point I/O
module.)
To enable the Rack Description Report:
1.
From the Reporting Configuration screen, highlight
Report selections 2
.
2.
Press
[F5]
Rack Description Report
. A list of report formats to select from will
appear.
3.
Press the function key associated with the desired format or press
[F4]
to disable
the report.
I/O Parts List Report
If you assigned real-world devices to real input and output addresses in the data base,
you may print the I/O Parts List Report. This report shows the total number of I/O
cards and total number of I/O points, then lists each I/O address and description text.
The report also prints a summary, indicating the total number of free I/O points. A
sample report is shown below.