Kr communication board, 1784–kr communication board – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 349

Configuration for Online Communications
15-13
1784–KR Communication Board
The 1784–KR interface card is used on a DH-485 network and does not require you to
use a PC communication port. See the Allen-Bradley publication
SLC 500 Modular
Hardware Style Installation and Operation Manual
, Publication 1747–6.2 for
connection information.
The table below describes the parameters that become available when you select this
device on a DH-485 network.
Parameter
Description
[F1]
Computer/Terminal
Address
enter the station address (0-31 decimal). This
address must be unique on the network.
[F4]
KR Memory Address
enter the -KR card’s base memory address *
[F5]
Baud rate
select the baud rate of the DH-485 network
[F6]
KR I/O Port Addr
enter the -KR card’s I/O address
[F7]
KR Interrupt #
enter the -KR card’s interrupt number
*For information on excluding memory addresses to avoid conflicts with the interface
card, refer to the
Hardware Interface Configuration Guide
.