Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 323)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
14-2
Rebuild Damaged Database
The Rebuild Damaged Database option corrects database files that have either been
damaged or were produced using a different version of PLC-500 A.I. Leaving the
online or offline ladder editor by rebooting the computer often damages the database,
making a rebuild necessary.
If the system fails to rebuild the database or if rebuilding the database does not correct
the problem, go to Repair/Compact Database , on page 14-14 .
To rebuild the database:
1. If you want to rebuild the database for one project, select that project from [F1]
Select Program/SLC-500 Addr on the Main Menu.
2. From the Main Menu, select [F5] Utility Options .
3. From the Utility Options menu, select [F1] Rebuild Damaged Data Base .
4. The following window appears. Select the appropriate option.
5. The system asks you if you want to force a rebuild of the index files. Select [F5]
No unless a previous rebuild failed to correct a database problem.
6. A status screen appears when the rebuild is in progress.
When completed, press any character key to return to the menu structure.