Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 24)

Introduction
1-13
PLC-500 A.I. Optional Add-On Modules
Rockwell Software produces the following software packages that operate in
conjunction with PLC-500 A.I. series software. For more information about these
products, contact Rockwell Software or your Rockwell Software distributor.
PID Loop Tuner and Data Acquisition/Monitoring
Tune your SLC 5/02, 5/03, and 5/04 PID loops quickly and easily! The PID Tuner
collects and analyzes data from PID loops, and suggests optimum tuning parameters for
the loops. You can directly download the suggested parameters to the SLC 500
processor. The PID Tuner is available either as an add-on to the SLC 500 software, or
as a stand-alone system with its own menu and database import functions. (Not
available for the MicroLogix 1000 controllers.)
Processor Emulation Module
Run and test your ladder logic without going online! The Processor Emulation module
allows your computer to run the ladder logic without a programmable controller. (Not
available for the MicroLogix 1000 controllers.)
Other PLC-500 A.I. Compatible Products
The following Rockwell Software products may be used with the PLC-500 A.I. software
or by themselves to simplify operations with the SLC 500. For more information on
these products, call Rockwell Software or your Rockwell Software distributor.
WINtelligent LINX™
Use Windows applications to monitor and write data to the SLC 500 data table!
WINtelligent LINX uses the Windows Dynamic Data Exchange (DDE) to transfer data
between SLC 500's (or PLC-5's, PLC-2's and PLC-3's) and DDE compatible Windows
applications, such as Microsoft Excel.