Editing a new project – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 44

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
2-10
5.
Press
[Esc]
. You will be asked to save the configuration. Select
[F1]
Yes
.
Now when you modify the address as described above, the software will prompt you for
a DH+ station address between 0 and 77 (octal).
Editing a New Project
The first time you attempt to edit a new project with
[F2] Offline Programming/Doc
on the Main Menu PLC-500 A.I. will display the prompt shown below.
Select
[F1] Yes
to create the project files. PLC-500 A.I. prompts you to select the
processor type. See
Chapter 3 -Configuring the PLC-500 CPU and I/O Modules
for
information on configuring the system. If you select
[F5]
No
, the new program files are
not created and the File Selector utility appears. See
Selecting a Project File
on the
following page for information on using the File Selector to choose a different project
file.