beautypg.com

System mode configuration – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual

Page 387

background image

Channel Configuration

16-9

System Mode Configuration

1.

From the Channel Configuration screen, press

[F4]

Ch0Sys

. This displays the

configuration screen for System Mode. Depending on the System Mode Driver you

have selected, you will see a screen similar to the following:

2.

Edit the parameters. Refer to the tables below for a description of the parameters.

§

Move the highlight to the parameter you want to change.

§

Either press

[F9]

Select

to toggle the setting of the parameter or (if the

message

Enter CFG value:

appears near the bottom of the screen) type the

numeric value for the parameter.

§

When you have set the parameters the way you want them, press

[F1]

Accept

.

3.

Press

[Esc]

.

This manual is related to the following products: