beautypg.com

Pcmk interface card, 1784-pcmk interface card – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual

Page 350

background image

MicroLogix 1000 and PLC-500 A.I. Series Software Reference

15-14

1784-PCMK Interface Card

The 1784-PCMK is a Type II PCMCIA card that serves as an interface between SLC

processors and your programming terminal. You must have DOS version 6.0 or later

and a PCMCIA 2.1 compliant notebook computer to use this card with PLC-500 A.I.

Refer to the RSI document,

Hardware Interface Configuration Guide

, or the user

configurable help in PLC-500 A.I. (

[Alt-H]

) for PCMK configuration information.

The table below describes the parameters that become available when you select this

device on a DH-485 network.

Note

You need Rockwell Software’s S5-104 cable to use a 1784-PCMK card on a DH-485

network.

Communication Medium

Parameter

DH-485 (w/RSI S5-103)

DH+ / DH-485 Bridged

DH+

[F1]

Computer/

Terminal
Address

enter the station address
(0-31 decimal). This
address must be unique
on the network.

enter the station address
(0-77 octal). This
address must be unique
on the network.

enter the station address (0-77
octal). This address must be
unique on the network.

[F4]

PCMK

Socket (Slot)

enter the PCMCIA slot
(0 or 1) where the PCMK
card is located and PLC-
500 A.I. will find any
other necessary
information from
PCMKINIT.COM or
Windows® 95

enter the PCMCIA slot
(0 or 1) where the PCMK
card is located and PLC-
500 A.I. will find any
other necessary
information from
PCMKINIT.COM or
Windows® 95

enter the PCMCIA slot (0 or 1)
where the PCMK card is located
and PLC-500 A.I. will find any
other necessary information from
PCMKINIT.COM or Windows®
95

[F5]

Baud rate

select the baud rate of
the DH-485 network

not available

not available

[F7]

1785-KA5

DH+ Address

not available

enter the DH+ station
address of the 1785-KA5

not available

[F8]

Terminal

Name

not available

enter an 8-character
name that will be
displayed when a DH+
Who Active is run

enter an 8-character name that
will be displayed when a DH+
Who Active is run

[F9]

DH+ Link

ID

not available

enter the DH+ channel
link ID of the 1785-KA5

not available

This manual is related to the following products: