Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 498)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
20-14
Deleting a Processor Password
The delete password function simply deletes the existing password.
To delete the processor password:
1. From the top level of the ladder editor, press [F6] Utility .
2. Press [F9] Util2 .
3. Press [F9] Passwrd .
4. Press [F2] Delete . PLC-500 A.I. will prompt you to make sure you want to delete
the password. (You don’t need to enter the password, because you already used it
to begin online or offline editing.)
5. Press [F1] Yes . The password is deleted.
Editing a Processor Master Password
To enter the processor Master Password:
1. From the top level of the ladder editor, press [F6] Utility .
2. Press [F9] Util2 .
3. Press [F9] Passwrd .
4. Press [F3] edtMast . The system prompts you for the Master Password.
5. Type the password, (up to 10 digits) and press [Enter] . PLC-500 A.I. will ask you
to type the password again. Type the password again and press [Enter] . The
password is entered in the processor.
6. Press [Esc] to continue.
Command Portal keys
for this function:
.UUPD
Command Portal keys
for this function:
.UUPM