Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 17)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
1-6
What’s New in Version 8.04
PLC-500 A.I. version 8.04 adds the following features.
•
Support for SLC 5/03 enhanced (OS301) and SLC 5/04 (OS400) processors
•
MicroLogix 1000 controller programming
•
ASCII, string and floating point data types
•
Extended memory use
•
Support for Allen-Bradley Ethernet, 1784 KTX/KTXD, and DH+ communications
•
New driver added for 1784-PCMK card allowing you to use almost any vendor’s
card services and socket services
•
Support for RSI LAN Logistics, 1770-KF2B communications
•
Support for WinLinx Ethernet to DH+ communications (v8.05)
•
Local/remote settings for DH+ devices (v8.05)
•
I/O bit display mode can be set to either include or exclude the word number
•
Custom display screens are stored in one file, *.CDL, and get backed up with the
project in the .IB1 file. Comments can be entered on custom display screens.
What’s New in Version 8.10
PLC-500 A.I. version 8.10 adds the following features.
•
Support for SLC 5/03 OS302 and SLC 5/04 OS401 processors
•
Indirect addressing (SLC 5/03 OS302 and SLC 5/04 OS401 processors only)
•
Global Status File containing Global Status Words from each processor on the
DH+ network
•
Short addresses
•
New instructions including trigonometric and logarithmic instructions and
compute expressions
•
Output cross referencing on selected instructions
•
Multipoint monitoring and editing
•
Configuration for SLC 5/03 and 5/04 DF1 Master