CANOGA PERKINS 9175 Command Reference - Manual (Page 93)

CanogaOS Command Reference
6-3
Command Syntax
vlan VLAN_LIST
no vlan VLAN_LIST
VLAN_LIST: vlan list connected with ‘-’ and ‘,’, for example, “1-10,15,20,30-40”
Command Mode
VLAN configuration
Usage
The vlan list should be connected with ‘-’ and ‘,’, the value should be in the range of <1-4094> and
should be ascending order.
Vlan 1 is the default vlan and all ports have been added to it by default.
Default VLAN 1 can not be removed.
Examples
This example shows how to add vlans of “100,200,300-400”.
Switch(config-vlan)# vlan 100,200,300-400
This example shows how to remove vlans of “100,200,300-400”.
Switch(config-vlan)# no vlan 100,200,300-400
Related Commands
vlan <1-4094>
show vlan vlan
show vlan all
6.5 show vlan
Use this command to display specific vlan information.
Command Syntax
show vlan vlan
vlan: <1-4094> vlan id
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the information on vlan 11:
Switch# show vlan 11
Related Commands