CANOGA PERKINS 9175 Command Reference - Manual (Page 705)

CanogaOS Command Reference
40-34
raw 0 0 *:89 *:* 7
raw 0 0 *:103 *:* 7
raw 0 0 *:58 *:* 7
Related Commands
show network connections
show network statistics
40.46 show network connections
To display the network connections in your switch, use the show network connections command in
privileged EXEC mode.
Command Syntax
show network connections {all | ipv4 | ipv6} {all | raw | tcp | udp} [numeric]
all Display IPv4 and IPv6 network services.
ipv4 Display IPv4 network services.
ipv6 Display IPv6 network services.
all Display RAW, TCP, and UDP information.
raw Display RAW information.
tcp Display TCP information.
udp Display UDP information.
numeric (Optional) Show numerical host addresses and port numbers.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show network connections command:
Switch# show network connections all all
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 1.1.2.3:telnet 1.1.2.2:55369 ESTABLISHED
tcp 0 0 1.1.2.3:telnet 1.1.2.2:59851 ESTABLISHED
tcp 0 0 localhost:705 localhost:3868 ESTABLISHED
tcp 0 0 localhost:3868 localhost:705 ESTABLISHED
tcp 0 0 localhost:705 localhost:3869 ESTABLISHED
tcp 0 0 localhost:3869 localhost:705 ESTABLISHED
tcp 0 0 localhost:705 localhost:3870 ESTABLISHED
tcp 0 0 localhost:3870 localhost:705 ESTABLISHED
tcp 0 0 localhost:705 localhost:3871 ESTABLISHED