CANOGA PERKINS 9175 Command Reference - Manual (Page 580)

CanogaOS Command Reference
32-5
THRESH3: The drop threshold for green-colored packets. If the current queue length is greater than the
threshold, all incoming green-colored packets will be dropped.
Command Mode
SAP Egress Policy Configuration
Usage
None
Examples
In the following example, the queue <0-3> threshold command is used to set drop threshold for queue
0.
Switch(config)# qos sap-egress evc110-policy-at-egress-uni
Switch(config-sap-egress)# queue 0 threshold 16 24 32
Related Commands
None
32.7 qos net-egress
Use this command to create a network egress policy for H-QoS. The network egress policy defines the
SLA (Service Level Agreement) for EVCs as they leave the egress NNI. To remove the egress policy,
use the no form of this command.
Command Syntax
qos net-egress POLICY-NAME
no qos net-egress POLICY-NAME
POLICY-NAME: The name, containing at most 40 characters, identifies an unique network egress policy
for H-QoS. The valid policy name should be initiated within the numbers and alphabet and the remain
characters can additionally include “.”, “-”, “_”.
Command Mode
Global configuration
Usage
When a network egress policy is removed, it should also be de-associated from relevant EVC.
Examples
In the following example, the qos net-egress POLICY-NAME command is used to create a network
egress policy for H-QoS.
Switch(config)# qos net-egress evc110-policy-at-egress-nni
Related Commands