CANOGA PERKINS 9175 Command Reference - Manual (Page 585)

CanogaOS Command Reference
32-10
Command Mode
Global configuration
Usage
None
Examples
In the following example, the ethernet evc reserved start-vlan command is used to reserve 200 VLANs
with starting VLAN of 3800 for creating EVC.
Switch(config)# ethernet evc reserved start-vlan 3800 number 200
Related Commands
None
32.14 ethernet evc
Use this command to create an EVC instance. To remove the EVC, use the no form of this command.
Command Syntax
ethernet evc EVC-NAME (double-tag |)
no ethernet evc EVC-NAME
NAME: The name, containing at most 16 characters, identifies an unique EVC. The valid EVC name
should be initiated within the numbers and alphabet and the remain characters can additionally include
“.”, “-”, “_”.
double-tag: The option is used to create an special EVC for encapsulating double VLAN tags for
untagged packets.
Command Mode
Global configuration
Usage
None
Examples
In the following example, the ethernet evc EVC-NAME command is used to create an EVC.
Switch(config)# ethernet evc evc100
Related Commands
None