CANOGA PERKINS 9175 Command Reference - Manual (Page 378)

CanogaOS Command Reference
21-11
Command Syntax
show ip mroute [ip_address |count |route-limit |sparse |summary]
ip_address: source or group ip address
count: route and packet count data
route-limit: max route limit value
sparse: show sparse multicast routes
summary: provide abbreviated display
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the route and packet count data.
Switch#show ip mroute count
IP Multicast Statistics
Total 0 routes using 0 bytes memory
Route limit/Route threshold: 1024/1024
Total NOCACHE/WRONGVIF/WHOLEPKT recv from fwd: 0/0/0
Total NOCACHE/WRONGVIF/WHOLEPKT sent to clients: 0/0/0
Immediate/Timed stat updates sent to clients: 0/0
Reg ACK recv/Reg NACK recv/Reg pkt sent: 0/0/0
Next stats poll: 20:47:51
Forwarding Counts: Pkt count/Byte count, Other Counts: Wrong If pkts
Fwd msg counts: WRONGVIF/WHOLEPKT recv
Client msg counts: WRONGVIF/WHOLEPKT/Imm Stat/Timed Stat sent
Reg pkt counts: Reg ACK recv/Reg NACK recv/Reg pkt sent
This example shows how to display the max route limit value.
Switch#show ip mroute route-limit
Max Multicast Route Limit Number: 1024
Multicast Route Limit Warning Threshold: 1024
Current Multicast Route Entry Number: 0
This example shows how to display the summary of the ip multicast routing table.
Switch# show ip mroute summary
IP Multicast Routing Table
Flags: I - Immediate Stat, T - Timed Stat, F - Forwarder installed
Timers: Uptime/Stat Expiry
Interface State: Interface (TTL)
Related Commands
show ip igmp groups