CANOGA PERKINS 9175 Command Reference - Manual (Page 188)

CanogaOS Command Reference
12-6
vrf name VRF instance name.
protocol (Optional) The name of a routing protocol, or the keyword connected, or
static. If you specify a routing protocol, use one of the following keywords:
bgp, ospf, and rip.
Command Mode
User EXEC
Privileged EXEC
Usage
You can display all active dynamic static routes with both the show ip route database and show ip
route database static commands after these active routes are added in the Routing Information Base
(RIB).
Examples
The following is sample output from the show ip route database command:
Switch# show ip route database
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
[*] - [AD/Metric]
> - selected route, * - FIB route, p - stale info
O *> 1.1.1.0/24 [110/2] via 10.10.1.1, eth-0-23, 00:48:58
O *> 2.2.2.0/24 [110/3] via 10.10.1.1, eth-0-23, 00:32:07
C *> 3.3.3.0/24 is directly connected, eth-0-1
C *> 10.10.1.0/24 is directly connected, eth-0-23
O *> 10.10.2.0/24 [110/2] via 10.10.1.1, eth-0-23, 00:32:07
O *> 10.10.3.0/24 [110/3] via 10.10.1.1, eth-0-23, 00:32:07
C *> 10.10.4.0/24 is directly connected, eth-0-20
K *> 192.168.0.0/24 is kernel directly connected, management interface
Related Commands
ip route
show ip route
12.8 show ip protocols
To display the parameters and current state of the active routing protocol process, use the show ip
protocols command in privileged EXEC mode.
Command Syntax
show ip protocols [vrf name | protocl]