CANOGA PERKINS 9175 Command Reference - Manual (Page 117)

CanogaOS Command Reference
7-14
Interface mode
Default
Usage
Examples
Set the value to enforce the spanning tree protocol:
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree force-version 1
Set the default protocol version:
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# no spanning-tree force-version
Related Commands
7.22 spanning-tree restricted-tcn
Use this command to set the restricted TCN value of the port to TRUE. Use the no parameter with this
command to set the restricted TCN value of the port to FALSE.
Command Syntax
spanning-tree restricted-tcn
no spanning-tree restricted-tcn
Command Mode
Interface mode
Default
The default restricted TCN value is FALSE.
Usage
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree restricted-tcn
Related Commands