CANOGA PERKINS 9175 Command Reference - Manual (Page 217)

CanogaOS Command Reference
15-8
no auto-cost reference-bandwidth
reference-bandwidth mbps Rate in Mbps (bandwidth). The range is from 1 to 4294967;
the default is 100.
Default
100 Mbps
Command Mode
Router configuration
Usage
The value set by the ip ospf cost command overrides the cost resulting from the auto-cost command.
Examples
The following example changes the cost of the cost link to 1GBps.
router ospf 1
auto-cost reference-bandwidth 1000
Related Commands
ip ospf cost
15.8 clear ip ospf
To clear redistribution based on the Open Shortest Path First (OSPF) routing process ID, use the clear
ip ospf command in privileged EXEC mode.
Command Syntax
clear ip ospf [pid] process
pid (Optional) Process ID.
Command Mode
Privileged EXEC
Usage
Use the pid argument to clear only one OSPF process. If the pid argument is not specified, all OSPF
processes are cleared.
Examples
The following example clears all OSPF processes:
Switch# clear ip ospf process
Related Commands