CANOGA PERKINS 9175 Command Reference - Manual (Page 149)

CanogaOS Command Reference
9-1
9 QinQ Commands
9.1 vlan mapping table
Use this command to add or delete vlan mapping table
Command Syntax
vlan mapping table WORD
no vlan mapping table WORD
WORD: the name of vlan mapping table.
Command Mode
Global configuration
Usage
This example shows how to create a vlan mapping table.
Examples
Create vlan mapping table Map1.
Switch(config)# vlan mapping table MAP1
Switch (config-vlan-mapping)#
Related Commands
show vlan mapping table WORD
9.2 raw-vlan mapped-vlan
Use this command add vlan mapping entry to vlan mapping table.
Command Syntax
raw-vlan VLAN_ID mapped-vlan <1-4094>
raw-vlan out-of-range mapped-vlan <1-4094>
raw-vlan untagged mapped-vlan <1-4094>
no raw-vlan VLAN_ID
no raw-vlan out-of-range
no raw-vlan untagged
no mapped-vlan VLAN_ID
raw-vlan: Incoming packet’s outer vlan id;
VLAN_ID: raw vlan id, range from 1-4094, the format could be 1,2,3 or 1-20;
out-of-range: vlans isn’t specified;
untagged: untagged packet;
mapped-vlan: The vlan mapped from raw-vlan;
<1-4094>: mapped vlan id
Command Mode
VLAN mapping configure mode