CANOGA PERKINS 9175 Command Reference - Manual (Page 549)

CanogaOS Command Reference
31-10
DSCP map to PRIORITY & COLOR:
-------------------------------------------
DSCP : 0 1 2 3 4 5 6 7
priority: 0 1 2 3 4 5 6 7
color : green green green green green green green green
......
Related Commands
show qos map-table all
show qos map-table egress
31.12 cos
Use this command to configure default cos value on port.
To cancel this setting, use the no form of this command.
Command Syntax
cos <0-7>
no cos
<0-7>: cos value
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure default cos value to 5.
Switch(config-if)# cos 5
This example shows how to cancel this setting.
Switch(config-if)# no cos
Related Commands
None
31.13 trust dscp
Use this command to configure the port trust state to dscp to classify ingress packets with the packet
DSCP values.
Command Syntax
trust dscp