CANOGA PERKINS 9175 Command Reference - Manual (Page 702)

CanogaOS Command Reference
40-31
234 tty2 1320 2428 607 bash
233 tty1 1316 2428 607 bash
684 ? 1312 4716 1179 ripngd
Related Commands
show processes cpu sorted
40.44 show memory
To display memory utilization information about the active processes, use the show memory command
in privileged EXEC mode.
Command Syntax
show memory [all | bgp | bhm | chsm | dot1x | imi | ipv6 | lacp | ldp | lib | mstp | nsm | ospf | pim |
rip | rstp | summary]
all All memory information
bgp Border Gateway Protocol (BGP)
bhm Health monitoring
chsm Chassis management
dot1x IEEE 802.1X Port-Based Access Control
imi Integrated Management Interface (IMI)
ipv6 Internet Protocol version 6 (IPv6)
lacp Link Aggregation Control Protocol (LACP)
ldp Label Distribution Protocol (LDP)
lib Library information
mstp Spanning Tree Protocols (STP/RSTP/MSTP)
nsm Network Service Module (NSM)
ospf Open Shortest Path First (OSPF)
pim Protocol Independent Multicast (PIM)
rip Routing Information Protocol (RIP)
rstp Rapid Spanning Tree Protocol (RSTP)
summary Summary memory information
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show memory command with keyword bgp:
Switch# show memory bgp
Library memories for BGP