CANOGA PERKINS 9175 Command Reference - Manual (Page 396)

CanogaOS Command Reference
24-1
24 PIM Commands
24.1 ip pim accept-register
Use this command to apply an access-list to limit the pim register message received by rp.
To remove this setting, use the no form of this command.
Command Syntax
ip pim accept-register list list
no ip pim accept-register list
list: the name of the access-list to be applied
Command Mode
Global configuration
Usage
This feature is used to prevent the unauthorized user registered to the switch.
When enable this feature, the system will send back a register stop message when the unauthorized
register message is received.
Examples
This example shows how to apply the access-list acl1 to limit the pim register message received by rp.
Switch(config)#ip pim accept-register list acl1
This example shows how to remove the limits.
Switch(config)#no ip pim accept-register
Related Commands
None
24.2 ip pim anycast-rp
Use this command to set anycast rendezvous-point.
To remove the configurations, use the no form of this command.
Command Syntax
ip pim anycast-rp rA.rB.rC.rD mA.mB.mC.mD
no ip pim anycast-rp rA.rB.rC.rD [mA.mB.mC.mD]
rA.rB.rC.rD: anycast rp address
mA.mB.mC.mD: anycast member rp address
Command Mode
Global configuration
Usage