CANOGA PERKINS 9175 Command Reference - Manual (Page 461)

CanogaOS Command Reference
26-3
no mpls ftn-entry
26.4 no mpls ftn-entry
Use this command to remove one static FTN entry.
Command Syntax
no mpls ftn-entry {A.B.C.D M.M.M.M | A.B.C.D/M} A.B.C.D
Syntax Description
A.B.C.D
M.M.M.M FEC for FTN entry.
A.B.C.D/M FEC for FTN entry.
A.B.C.D Nexthop ip address.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls ftn-entry command is used to remove one static FTN
entry:
Switch# configure terminal
Switch(config)# no mpls ftn-entry 200.200.200.0/24 12.12.12.2
Related Commands
mpls ftn-entry
26.5 mpls lsp-tunneling
Use this command to specify one ILM to tunnel.
Command Syntax
mpls lsp-tunneling INLABEL OUTLABEL A.B.C.D/M
Syntax Description
INLABEL Incoming label, the range is 16 to 1048575.
OUTLABEL Outgoing label, the range should be from 16 to
1048575, or 3(implicit null) or 0(explicit null).
A.B.C.D/M Tunnel FEC.