CANOGA PERKINS 9175 Command Reference - Manual (Page 770)

CanogaOS Command Reference
44-15
Examples
The following is sample output from the show snmp-server sys-info command:
Switch# show snmp-server sys-info
Contact: [email protected]
Location: Denvor
Related Commands
44.22 show snmp-server trap-receiver
To display the SNMP traps receiver, use the show snmp-server trap-receiver command in privileged
EXEC mode.
Command Syntax
show snmp-server trap-receiver
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show snmp-server trap-receiver command:
Switch# show snmp-server trap-receiver
Target-ipaddress udpport version pdu-type community
===========================================================
1.1.1.1 234 v2c inform public
1.1.1.1 234 v2c trap public
1.1.1.1 234 v1 trap public
Related Commands
44.23 show snmp-server usm-user
To display information about the configured characteristics of Simple Network Management Protocol
(SNMP) users, use the show snmp-server usm-user command in privileged EXEC mode.
Command Syntax
show snmp-server usm-user [username]
username (Optional) Name of a specific user or users about which to display SNMP information.