CANOGA PERKINS 9175 Command Reference - Manual (Page 322)

CanogaOS Command Reference
18-3
show ip sla monitor
18.4 TIMEOUT
Sets the amount of time an IP SLA operation waits for a response from its
request packet.
To turn to default value, use no form of this command.
Command Syntax
timeout seconds
no timeout
Syntax Description
seconds Time range is from 1 to 4800.
Frequency • timeout • threshold
Command Mode
Ipsla mode
Defaults
Default value is 5 seconds.
Examples
In the following example, the timeout command is used to set the time range:
Switch(config)#ip sla monitor 1
Switch(config-ipsla)# timeout 10
Related Commands
show ip sla monitor
18.5 THRESHOLD
Sets the upper threshold value for calculating network monitoring statistics
created by an IP SLAs operation.
To turn to default value, use no form of this command.
Command Syntax
threshold seconds
no threshold
Syntax Description
seconds Time range is from 1 to 4800.