CANOGA PERKINS 9175 Command Reference - Manual (Page 444)

CanogaOS Command Reference
25-32
25.37 s how ldp fec
Use the following command to display all FECs known to the current LSR.
Command Syntax
show ldp fec [host | prefix]
Syntax description
host The host FEC.
prefix The prefix FEC.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp fec command is used to display all
FECs known to the current LSR:
Switch# show ldp fec
LSR codes : E/N - LSR is egress/non-egress for this FEC,
L - LSR received a label for this FEC,
> - LSR will use this route for the FEC
Code FEC Session Out Label Nexthop Addr
E > 10.10.0.0/24 non-existent none connected
NL 10.10.0.0/24 192.168.3.5 impl-null connected
E > 192.168.3.0/24 non-existent none connected
NL 192.168.3.0/24 192.168.3.5 impl-null connected
E > 192.168.4.0/24 non-existent none connected
NL 192.168.4.0/24 192.168.3.5 impl-null connected
NL 192.168.5.0/24 192.168.3.5 impl-null invalid
Related Commands
25.38 show ldp interface
Use this command to display informations for all interfaces, or detailed
information for a specific interface.