CANOGA PERKINS 9175 Command Reference - Manual (Page 236)

CanogaOS Command Reference
15-27
Router configuration
Usage
If you disable the sending of routing updates on an interface, the particular subnet will continue to be
advertised to other interfaces, and updates from other switches on that interface continue to be received
and processed.
Examples
The following example sets the interface eth-0-1 as passive:
router ospf 200
network 10.108.0.0/16 area 0
passive-interface eth-0-1
!
Related Commands
router ospf
15.31 redistribute (OSPF)
To redistribute routes from one routing domain into Open Shortest Path First (OSPF) routing domain,
use the redistribute command in router configuration mode. To disable redistribution, use the no form
of this command.
Command Syntax
redistribute protocol [metric metric-value] [metric-type type-value]
no redistribute protocol [metric metric-value] [metric-type type-value]
protocol (Optional) The name of a routing protocol, or the keyword connected,
or static. If you specify a routing protocol, use one of the following
keywords: bgp, and rip.
metric metric-value (Optional) When redistributing other processes to an OSPF process,
the default metric is 20 when no metric value is specified.
metric-type type-value For OSPF, the external link type associated with the default route
advertised into the OSPF routing domain. It can be one of two values:
‹ Type 1 external route
‹ Type 2 external route
If a metric-type is not specified, the switch adopts a Type 2 external
route.
Default
Route redistribution is disabled.
metric metric-value: 20
metric-type type-value: Type 2 external route
Command Mode