CANOGA PERKINS 9175 Command Reference - Manual (Page 756)

CanogaOS Command Reference
44-1
44 SNMP Commands
44.1 snmp-server access
To set the access security of MIB view, use the snmp-server access command in global configuration
mode. To remove the access security of MIB view, use the no form of this command.
Command Syntax
snmp-server access group-name security-model usm {auth | noauth | priv} [context context [prefix |
exact] | read read-view | write write-view | notify notify-view]
no snmp-server access security-model usm {auth | noauth | priv} [context context]
group-name Name of the group.
auth Specifies authentication of a packet without encrypting it.
noauth Specifies no authentication of a packet.
priv Specifies authentication of a packet with encryption.
context context (Optional) Specifies the SNMP context to associate with this SNMP group and its
views.
prefix The context only match the prefix.
exact The context should match the whole part.
read read-view (Optional) Specifies a read view for the SNMP group. This view enables you to view
only the contents of the agent.
write write-view (Optional) Specifies a write view for the SNMP group. This view enables you to enter
data and configure the contents of the agent.
notify notify-view (Optional) Specifies a notify view for the SNMP group. This view enables you to
specify a notify, inform, or trap.
Default
No SNMP access group is defined.
Command Mode
Global configuration
Usage
Examples
The following is sample output from the snmp-server access command:
Switch(config)# snmp-server access manage security-model usm auth write _all_ read _all_
Related Commands